The DLC-250.8 is an 8-channel amplifier capable of delivering 250W into 4, 8, and 16-ohms from any channel pair, or 125W into 4, 8, or 16-ohms all channels driven; this 1U loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-250.8 can drive 70V/100V hi-Z loudspeakers directly - no internal transformer is required.
The DLC-250.8 can drive up to 32 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 128 in Hi-Z mode - all from a 1U chassis!
The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board WiFi access point and includes parametric EQ, delay, gain, and limiter DSP objects to make system optimization easy.
Rack ears are included. Full API and control modules for AMX, Control4. Crestron, Crestron Home, ELAN, Q-SYS, and RTI are available.
FEATURES:
-
1U 8-channel Amplified Loudspeaker Controller
-
250W per Channel @ 4, 8, 16-ohms and 70V/100V
-
125W per Channel @ 4, 8, 16-ohms All Channels Driven
-
125W per Channel @ 70V/100V All Channels Driven
-
Power Sharing Between Neighboring Channels
-
Drives up to 32 Theory 16-ohm Speakers from 1U Rack Space at Low-Z or up to 128 in 70V/100V Operation
APPLICATIONS:
Background and Foreground Business Audio Systems: Bars and sports bars, restaurants, retail stores, hotels, houses of worship, corporate conferences, screening rooms, lobbies, casinos, etc.
Distributed Audio: Residential and commercial distributed audio systems, airports, higher-ed campuses, and education facilities.
High Output Surround Sound Systems: Residential and commercial media rooms, gaming systems, executive boardrooms, etc.
Music and Video Post Production: Surround and Dolby Atmos mix rooms where maximum out-put in compact depth is required, music post-production.
Two-channel Music Systems: Premium residential and corporate stereo music systems, music, and performance higher education.
SPECS:
| Description: | 8-Channel Amplified Distribution Loudspeaker Controller |
| 1U Chassis | |
| IP Control via Ethernet or Built-In WiFi Access Point | |
| Power Sharing Between Neighboring Channels | |
| Operation: | LoZ and HiZ (70V/100V) Operation |
| Inputs: | 8 x Balanced Analog Audio |
| 8 x RCA Unbalanced Analog Audio | |
| 1 x S/PDIF Digital Audio (stereo) | |
| Outputs: | 8 x Speaker Outputs |
| S/PDIF Digital Audio (stereo) | |
| Trigger: | +12VDC |
| Audio Operation: | 48kHz/24-bit |
| On-Board DSP: | 48kHz/32-bit |
| DSP Features: | Loudspeaker Processing For All Theory Models, plus: |
| Input Matrix Mixer | |
| 5 Parametric Input EQ Filters | |
| Input Trim | |
| Stereo/Mono Inputs and Zones | |
| Signal Routing Including Priority Automatic Routing | |
| Audio Ducking | |
| 10 Parametric Output EQ Filters | |
| Crossovers | |
| Gain | |
| Delay | |
| Polarity | |
| Peak and RMS Limiters | |
| Frequency Response: | 20Hz-20kHz, +/-0.25dB |
| Power Output: | 250W per channel @ 4, 8, 16-ohms and 70V/100V |
| 125W per channel @ 4, 8, 16-ohms all channels driven | |
| 125W per channel @ 70V/100V all channels driven | |
| Voltage Gain: | Variable |
| Input Sensitivity (selectable): | +14dBu |
| +4dBu | |
| -10dBV (Unbalanced RCA) | |
| Microphone | |
| Power Requirements: | Standby: <1W |
| (1/8 power, all ch. driven): 70W | |
| Idle Noise(A-Wt): | -78dBV |
| Signal to Noise Ratio: | >106dB |
| Distortion (1kHz, 1dB below max output): | <0.02% |
| AC Operation: | 100V-240VAC, 50-60Hz |
| Terminals: | Eurblock Connectors |
| Outdoor Capability: | Indoor Use Only |
| Mounting Points: | Rack Mount (with included accessories) |
| Finish: | Matte Black |
| Dimensions: | 1.75" H x 19.0" W x 12.6" D (44mm H x 483mm W x 319mm D) |
| Net Weight: | 7.7 lbs. (3.5 kg) |
| Included Accessories: | Rack Mount Ears |