The Shure MoveMic Receiver is easily paired with your MoveMic One or MoveMic Two lavaliers. This standalone receiver ensures flawless compatibility with DSLR/mirrorless cameras, computers, and third party mobile apps. Simply connect via the supplied USB-C or 3.5mm cable and experience the versatility and superior sound quality of a game changing wireless clip-on microphone system.
Please Note: No microphones included. This receiver is made to be used with MoveMic One and MoveMic Two wireless lavalier microphone systems (sold separately).
SPECS:
- Audio
- Frequency Response: 50-20kHZ +/-1dB
- Dynamic Range (A-Weighted): 100dB
- Equivalent Noise (A-Weighted, Camera Out = Line Level): 31 dBSPL
- Equivalent Input Noise (A-Weighted, Direct to phone): 26 dBSPL
- Max Sound Pressure Level (SPL): 130dBSPL
- Sensitivity when used with MV-LAV (Mic Gain = 0dB): -45dBV @94dBSPL (1 Pascal RMS)
- Bit Depth: 24 Bit
- Sampling Rate: 48ksps or 44.1ksps (Host dependent)
- Gain Adjustment Range: 0 - 60 dB
- Minimum Load Impedance – HP: 16 ohms
- Maximum Headphone Output Level: 26.4mW @1% THD
- Minimum Load Impedance - Camera Out: 2k ohms
- Maximum Camera Output Level (Mic Setting): -26dBV
- Maximum Camera Output Level (Line Setting): -8.3dBV
- Latency to 3.5mm (without NR): 15.33 ms (within 1 frame @60fps)
- Latency to 3.5mm (with NR): 17.33 ms
- Latency to USB: Device Dependent Host Device Dependent
- Range: Up to 100ft (30m) line of sight
- Physical
- Overall Dimensions (with cold shoe mount fully extended): 2.55" x 2.64" x 0.75"
- Weight (w/o windscreen): 81 g [2.86 oz]
- Housing: Black PC/ABS Thermoplastic
- Antenna: Sheet metal (tin-plated steel)
IN THE BOX:
- MoveMic Hot Shoe Mountable Camera Receiver for MoveMic One and Two
- USB-C Cable
- 3.5mm Cable
- Manual
Please Note: No microphones included. This receiver is made to be used with MoveMic One and MoveMic Two wireless lavalier microphone systems (sold separately).
Dedicated Support from Start to Finish
- Concierge-Level Experience tailored to your needs
- Assistance with Troubleshooting and Product Insights
- Expert help for Product Set-Up
- Fast & Free Shipping on all orders
The Shure MoveMic Receiver is easily paired with your MoveMic One or MoveMic Two lavaliers. This standalone receiver ensures flawless compatibility with DSLR/mirrorless cameras, computers, and third party mobile apps. Simply connect via the supplied USB-C or 3.5mm cable and experience the versatility and superior sound quality of a game changing wireless clip-on microphone system.
Please Note: No microphones included. This receiver is made to be used with MoveMic One and MoveMic Two wireless lavalier microphone systems (sold separately).
SPECS:
- Audio
- Frequency Response: 50-20kHZ +/-1dB
- Dynamic Range (A-Weighted): 100dB
- Equivalent Noise (A-Weighted, Camera Out = Line Level): 31 dBSPL
- Equivalent Input Noise (A-Weighted, Direct to phone): 26 dBSPL
- Max Sound Pressure Level (SPL): 130dBSPL
- Sensitivity when used with MV-LAV (Mic Gain = 0dB): -45dBV @94dBSPL (1 Pascal RMS)
- Bit Depth: 24 Bit
- Sampling Rate: 48ksps or 44.1ksps (Host dependent)
- Gain Adjustment Range: 0 - 60 dB
- Minimum Load Impedance – HP: 16 ohms
- Maximum Headphone Output Level: 26.4mW @1% THD
- Minimum Load Impedance - Camera Out: 2k ohms
- Maximum Camera Output Level (Mic Setting): -26dBV
- Maximum Camera Output Level (Line Setting): -8.3dBV
- Latency to 3.5mm (without NR): 15.33 ms (within 1 frame @60fps)
- Latency to 3.5mm (with NR): 17.33 ms
- Latency to USB: Device Dependent Host Device Dependent
- Range: Up to 100ft (30m) line of sight
- Physical
- Overall Dimensions (with cold shoe mount fully extended): 2.55" x 2.64" x 0.75"
- Weight (w/o windscreen): 81 g [2.86 oz]
- Housing: Black PC/ABS Thermoplastic
- Antenna: Sheet metal (tin-plated steel)
IN THE BOX:
- MoveMic Hot Shoe Mountable Camera Receiver for MoveMic One and Two
- USB-C Cable
- 3.5mm Cable
- Manual
Please Note: No microphones included. This receiver is made to be used with MoveMic One and MoveMic Two wireless lavalier microphone systems (sold separately).