The MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.
Those who choose to adopt the MC Windfeld Ti will experience the lifelike, dynamic and open sound, with exceedingly clear midrange. The MC Windfeld Ti remains extremely musical while paying close attention to micro dynamic details, with its delicate, but also analytical nature.
Unsurpassed analog reproduction Accuracy level
Our extensive knowledge of vibration properties, characteristics in different shapes and materials, competences in magnetism, mechanical design, and new technologies has been applied for optimization of the MC Windfeld model.
When combined with Ortofon’s world-class knowledge in analog sound reproduction, the MC Windfeld Ti will undoubtedly provide sound which is literally unsurpassed and simply has to be experienced.
Ortofon Replicant 100 Stylus
Another precondition for linear reproduction with a wide frequency range and optimal tracking performance is a diamond - the shape of which is as close as possible to the original cutting stylus.
As featured in the entire Exclusive Series, the MC Windfeld Ti makes use of Ortofon’s Replicant 100 diamond, known for its thin and light profile and extraordinarily large vertical contact surface. Since the Replicant 100 is closest to the shape of the cutting stylus, it can trace with accuracy unparalleled by any other stylus in existence. Special polishing of the diamond along with the use of a Boron cantilever offers remarkable transparency, speed, and responsiveness beyond that of any other combination.
Zero-loss transmission Boron cantilever
Using Ortofon’s Aucurum coils of gold-plated, 6NX oxygen-free copper allows for zero-loss transmission of the diamond’s movements via its Boron cantilever. This combination, which has also been employed for use in the MC Windfeld, MC A90, and MC A95 cartridges, combines low moving mass with an extremely high degree of rigidity.
SPECS:
-
Channel balance at 1 kHz0.5 dB
-
Output voltage at 1 kHz, 5cm/sec0.2 mV
-
Channel seperation at 1 kHz25 dB
-
Channel seperation at 15 kHz20 dB
-
Frequency response 20 Hz - 20 kHz+2 dB/- 1 dB
-
Tracking ability at 315Hz at recommended tracking force90 μm
-
Compliance, dynamic, lateral13 μm/mN
-
Stylus typeSpecial polished Nude Ortofon Replicant 100 on Diamond cantilever
-
Stylus tip radiusr/R 5/100 μm
-
Tracking force range2.0-2.5 g
-
Tracking force, recommended2.3 g
-
Tracking angle23°
-
Internal impedance, DC resistance6Ω
-
Recommended load impedance> 10 Ohm
-
Coil wire materialAucurum
-
Cartridge body materialSLM Titanium and Stainless Steel
-
Cartridge colourTitanium/Black
-
Cartridge weight11 g
Ortofon MC Windfeld Ti Moving Coil Cartridge
- $5,999.00
- FREE SHIPPING
Dedicated Support from Start to Finish
- Concierge-Level Experience tailored to your needs
- Assistance with Troubleshooting and Product Insights
- Expert help for Product Set-Up
- Free Shipping on all orders
The MC Windfeld Ti has gone to the next level by reducing unwanted vibrations and increasing the dynamic capability of the cartridge.
Those who choose to adopt the MC Windfeld Ti will experience the lifelike, dynamic and open sound, with exceedingly clear midrange. The MC Windfeld Ti remains extremely musical while paying close attention to micro dynamic details, with its delicate, but also analytical nature.
Unsurpassed analog reproduction Accuracy level
Our extensive knowledge of vibration properties, characteristics in different shapes and materials, competences in magnetism, mechanical design, and new technologies has been applied for optimization of the MC Windfeld model.
When combined with Ortofon’s world-class knowledge in analog sound reproduction, the MC Windfeld Ti will undoubtedly provide sound which is literally unsurpassed and simply has to be experienced.
Ortofon Replicant 100 Stylus
Another precondition for linear reproduction with a wide frequency range and optimal tracking performance is a diamond - the shape of which is as close as possible to the original cutting stylus.
As featured in the entire Exclusive Series, the MC Windfeld Ti makes use of Ortofon’s Replicant 100 diamond, known for its thin and light profile and extraordinarily large vertical contact surface. Since the Replicant 100 is closest to the shape of the cutting stylus, it can trace with accuracy unparalleled by any other stylus in existence. Special polishing of the diamond along with the use of a Boron cantilever offers remarkable transparency, speed, and responsiveness beyond that of any other combination.
Zero-loss transmission Boron cantilever
Using Ortofon’s Aucurum coils of gold-plated, 6NX oxygen-free copper allows for zero-loss transmission of the diamond’s movements via its Boron cantilever. This combination, which has also been employed for use in the MC Windfeld, MC A90, and MC A95 cartridges, combines low moving mass with an extremely high degree of rigidity.
SPECS:
-
Channel balance at 1 kHz0.5 dB
-
Output voltage at 1 kHz, 5cm/sec0.2 mV
-
Channel seperation at 1 kHz25 dB
-
Channel seperation at 15 kHz20 dB
-
Frequency response 20 Hz - 20 kHz+2 dB/- 1 dB
-
Tracking ability at 315Hz at recommended tracking force90 μm
-
Compliance, dynamic, lateral13 μm/mN
-
Stylus typeSpecial polished Nude Ortofon Replicant 100 on Diamond cantilever
-
Stylus tip radiusr/R 5/100 μm
-
Tracking force range2.0-2.5 g
-
Tracking force, recommended2.3 g
-
Tracking angle23°
-
Internal impedance, DC resistance6Ω
-
Recommended load impedance> 10 Ohm
-
Coil wire materialAucurum
-
Cartridge body materialSLM Titanium and Stainless Steel
-
Cartridge colourTitanium/Black
-
Cartridge weight11 g
PRODUCT INFORMATION:
Model: MC Windfeld Ti | Barcode: 5705796235135
WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov