Free standard shipping on all orders within the continental US.
This bundle includes (1) McIntosh MAC7200 Receiver and (2) McIntosh ML1 MKII Loudspeakers
ML1 Loudspeaker Mk II:
- Based off the first McIntosh speaker
- 4-way speaker with five separate drivers
- Engineered to handle up to 600 Watts
- Deep bass from 12" woofer with LD/HP technology
- Expansive sound stage so all listeners can enjoy the music
- Built from American Walnut with a satin finish
- Includes matching speaker stand
- Impedance Nominal: 8 Ohms
- Power Rating: 75 - 600 Watts
- Frequency Response: 27Hz - 45kHz
- Sound Pressure Level, 2.8V/1m: 85dB
- Crossover: 180Hz, 500Hz, 4.5kHz
- Number of Woofers: 1
- Woofer Size: 12"
- Woofer Type: Polypropylene cone and dust cap with synthetic rubber suspension
- Number of Midranges: Low Frequency (2), Upper Frequency (1)
- Midrange Size: Low Frequency (4"), Upper Frequency (2")
- Midrange Type: Low Frequency (Polypropylene cones and dust caps with synthetic rubber suspension), Upper Frequency (Soft Dome)
- Number of Tweeters: 1
- Tweeter Size: 3/4"
- Tweeter Type: Titanium Dome
- Unit Dimensions (W x H x D): 15" (38.1cm) x 42-1/8" (107cm) x 13-3/8" (34cm)
- Unit Weight: 62 lbs (28.1 kg)
McIntosh MAC7200 2-Channel Receiver:
- 200 Watts x 2 channel
- AM/FM Tuner
- Comes with DA1 Digital Audio Module installed
- Optional dealer installed upgrade to DA2 Digital Audio Module available
- Power Output Channel: 200w
- Number of Channels: 2
- Speaker Impedance: 2, 4, or 8 ohms
- Rated Power Band: 20Hz - 20kHz
- Total Harmonic Distortion: 0.005%
- Dynamic Headroom: 2dB
- Frequency Response: +0, -0.5dB 20Hz to 20kHz
- Frequency Response: +0, -3dB 10Hz to 100kHz
- Sensitivity Phono (Moving Coil): 0.25mV
- Sensitivity Phono (Moving Magnet): 2.5mV
- Sensitivity High Level (Balanced / Unbalanced): 0.5V / 0.25V
- Sensitivity Power Amp: 1.4V
- Signal to Noise Ratio (Moving Coil): 80dB
- Signal to Noise Ratio (Moving Magnet): 82dB
- Signal to Noise Ratio (High Level): 95dB
- Signal to Noise Ratio (Power Amp): 113dB
- Input Impedance (Balanced / Unbalanced): 20K / 20K
- Damping Factor: >40
- Maximum Output (Balanced / Unbalanced): 8V unbalanced
- Tone Controls: Bass and treble
- Tone bypass and input assign
- RS232 control input
- Power Control Output: 1 main, 2 trigger
- Rear Panel Data Port: 4
- Rear panel IR sensor input
- Input level match
- Vacuum Tube or Solid State: Solid
- Output autoformer
- Output meters
- Dual layer chassis
- Chassis Finish: Black painted steel
- McIntosh monogrammed heatsinks
- Power Requirement: 120V 50 / 60Hz, 4.4 amps
- Standby Power Requirement: <0.25 watts
- Dimensions: 7 5/8"h x 17 1/2"w x 22"d
PRODUCT INFORMATION:
Model: MAC7200+ML1MKII | Barcode:
WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Product Reviews
Based on 4 reviews
Write a review