Buy Now, Pay Later! When you choose Shop Pay at Checkout, You Can Split your Purchase into Flexible Installment Payments.*

DISCONTINUED

McIntosh D1100 2-Channel Digital Preamplifier


Unfortunately, this product has been discontinued. But don’t worry – there’s a new and updated version available!


  • Reference level digital preamp and DAC
  • Use as a standalone unit or with C1100

The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC). Its 8-channel, 32-bit DAC is used in Quad Balanced mode with half of it dedicated to the left audio channel and the other half to the right channel. It’s the most advanced DAC we’ve ever used and delivers an unprecedented level of performance so that all your digital music is reproduced with exceptional accuracy and authenticity.

Enough inputs – 9 to be exact – are included to keep even the largest digital system connected as 3 optical, 3 coaxial (2 RCA and 1 BNC), plus 1 each of MCT, AES/EBU and USB inputs are on board. The USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DSD256, DXD 352.8kHz and DXD 384kHz playback1. All the other inputs accept up to 24-bit/192kHz. The MCT input is a McIntosh exclusive and allows for enjoying to the high resolution audio found on SACDs via the MCT500 SACD/CD Transport. Three sets of balanced and unbalanced stereo outputs connect the D1100 to your system. One set of outputs has fixed volume while the other 2 have variable volume; the variable outputs can also be switched on and off for additional user configurability.

SPECS:

  • Number of Channels
    2
  • Total Harmonic Distortion
    0.0015% (at 2V Output)
  • Frequency Response
    +/-0.5dB from 4Hz to 20kHz
    +0.5/-3dB from 4Hz to 68kHz
  • Maximum Volts Out (Balanced / Unbalanced)
    16V RMS / 8V RMS
  • Sensitivity High Level (Balanced / Unbalanced)
    N/A
  • Sensitivity Phono (Moving Coil)
    N/A
  • Sensitivity Phono (Moving Magnet)
    N/A
  • Signal To Noise Ratio (High Level)
    111dB
  • Signal To Noise Ratio (Moving Coil)
    N/A
  • Signal To Noise Ratio (Moving Magnet)
    N/A
  • Voltage Gain (High Level)
    N/A
  • Voltage Gain (Moving Coil)
    N/A
  • Voltage Gain (Moving Magnet)
    N/A
  • Input Impedance (Balanced / Unbalanced)
    N/A
  • Unit Dimensions (W x H x D)
    17.5" (44.45cm) x 6" (15.24cm) x 19" (48.3cm)
  • Unit Weight
    26 lbs (11.8 kg)

 


PRODUCT INFORMATION:

Model: D1100 | Barcode: 842548105553

WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Sale

Unavailable

Sold Out