The SCL-1 is a custom in-room/built-in loudspeaker and is the flagship of the JBL Synthesis SCL loudspeaker range. It features JBL's patented D2430K dual 3-inch (75mm) compression driver mated to a large format High-Definition Imaging (HDI™) horn. Dual 12-inch (300mm) Carbon Cellulose Composite Cone (C4) cast-frame woofers operate in a patented Complementary Bass Alignment System (CBAS™) enclosure to provide high-output capability while delivering an easy load to the amplifier. A front-panel configuration panel allows for bi-wiring, bi-amplification, and crossover bypass for fully active operation with outboard digital crossovers. The SSW-1 delivers unparalleled performance behind projection screens and inside custom cabinetry and is ideal for use in large to extra-large rooms.
SPECS:
- Type: 2-Way In-room loudspeaker
- High Frequency Driver: 3" (75mm) dual annular Teonex ring-diaphragm compression driver with dual neodymium motor structures mated to Sonoglass HDI horn
- Recommended Amplifier Power: (80 Hz HPF)500 WRMS
- Loudspeaker Sensitivity: 94 dB/1W/1m
- Frequency Response: 40 Hz - 24 kHz (-6 dB), 3rd order LF roll-off
- Crossover Frequency: 775 Hz
- Impedance: 4 Ohm
- Recommended Amplifier Power (Full bandwidth): 500 WRMS
- Low Frequency Drivers: Dual 12-inch (300mm) Black Carbon Cellulose Composite Cone (C4) cast-frame woofers
- Coverage area, -6 dB @ 20 kHz: Approximately 90 degrees horizontal x 70 degrees vertical
- Coverage area, -6 dB @ 10 kHz: Approximately 120 degrees horizontal x 100 degrees vertical
- HF Level Controls: 3 Position - No grille, With grille, or With screen
- Enclosure Type: Complementary Bass Alignment System (CBAS™)
- Grille Dimensions: 47.98" H x 19" W x 0.787" D (1218.7mm x 482.6mm x 20mm)
- Product Dimensions: 47.98" H x 19" W x 14.49" D (1218.7mm x 482.6mm x 368.1mm)
- Product Weight: 177.5 lb. (80.5kg)
- Input Type: Dual sets of gold-plated binding posts