The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL.
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE.
The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
SPECS:
|
Frequency response |
30Hz - 250Hz |
|
Maximum SPL |
116dB SPL (peak @ 1m) |
|
Inputs |
Type / Impedance Connector Sensitivity |
Right, left, LFE Electronically balanced / 10 kOhms XLR 3 points socket Adjustable |
|
Outputs (towards satellites) |
Type/Impedance Connector |
Right, left Electronically balanced / 50 Ohms XLR 3 points plug |
|
Amplification |
350W rms, BASH ® technology |
|
|
Signal internal treatment and functions |
Subwoofer section Satellite section |
Mono right/left summation LFE + mono low-pass 24dB / octave Phase adjustment Polarity selection switch Switch high-pass filter, cut-off frequency selection 24dB / octave |
|
Control |
Adjustable subwoofer level Low-pass cut-off frequency setting Phase adjustment Polarity adjustment Subwoofer switch (mute) 2.1 “Bypass” (external remote control) High-pass frequency selection Releasable high-pass |
|
|
Visualization (LED) |
Power On Subwoofer switch(mute) Released high-pass |
|
|
Power supply |
Local supply Connection |
230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire |
|
Subwoofer |
11W7670, 105/8" (27cm) Focal “W” composite sandwich cone driver |
Dedicated Support from Start to Finish
- Concierge-Level Experience tailored to your needs
- Assistance with Troubleshooting and Product Insights
- Expert help for Product Set-Up
- Fast & Free Shipping on all orders
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL.
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE.
The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
SPECS:
|
Frequency response |
30Hz - 250Hz |
|
Maximum SPL |
116dB SPL (peak @ 1m) |
|
Inputs |
Type / Impedance Connector Sensitivity |
Right, left, LFE Electronically balanced / 10 kOhms XLR 3 points socket Adjustable |
|
Outputs (towards satellites) |
Type/Impedance Connector |
Right, left Electronically balanced / 50 Ohms XLR 3 points plug |
|
Amplification |
350W rms, BASH ® technology |
|
|
Signal internal treatment and functions |
Subwoofer section Satellite section |
Mono right/left summation LFE + mono low-pass 24dB / octave Phase adjustment Polarity selection switch Switch high-pass filter, cut-off frequency selection 24dB / octave |
|
Control |
Adjustable subwoofer level Low-pass cut-off frequency setting Phase adjustment Polarity adjustment Subwoofer switch (mute) 2.1 “Bypass” (external remote control) High-pass frequency selection Releasable high-pass |
|
|
Visualization (LED) |
Power On Subwoofer switch(mute) Released high-pass |
|
|
Power supply |
Local supply Connection |
230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire |
|
Subwoofer |
11W7670, 105/8" (27cm) Focal “W” composite sandwich cone driver |