Audio-Technica AT-VM95ML/H Headshell & MM Cartridge Combo Kit
$219.00
FREE SHIPPING
Free standard shipping on all orders within the continental US.
$ {{amount}}
Dedicated Support from Start to Finish
Concierge-Level Experience tailored to your needs
Assistance with Troubleshooting and Product Insights
Expert help for Product Set-Up
Free Shipping on all orders
DESCRIPTION
The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Features
Microlinear stylus & Aluminum Cantilever
Dual Moving Magnet Design
Durable Low-Resonance Housing
Pre-Mounted on AT-HS6BK Headshell
VM95 Series
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
SPECIFICATIONS
Frequency Response: 20-25,000 Hz
Channel Separation: 23 (dB at 1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude square shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 3.5 mV (1 kHz, 5 cm/sec.)
Output Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: 2.2 x 0.12 mil Microlinear
Cantilever: Aluminum pipe
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
The AT-VM95ML/H combo kit includes the AT-VM95ML dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Features
Microlinear stylus & Aluminum Cantilever
Dual Moving Magnet Design
Durable Low-Resonance Housing
Pre-Mounted on AT-HS6BK Headshell
VM95 Series
This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
SPECIFICATIONS
Frequency Response: 20-25,000 Hz
Channel Separation: 23 (dB at 1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude square shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 3.5 mV (1 kHz, 5 cm/sec.)
Output Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: 2.2 x 0.12 mil Microlinear
Cantilever: Aluminum pipe
Static Compliance: 20 x 10 – 6 cm / dyne
Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
