Free standard shipping on all orders within the continental US.
$ {{amount}}
Dedicated Support from Start to Finish
Concierge-Level Experience tailored to your needs
Assistance with Troubleshooting and Product Insights
Expert help for Product Set-Up
Free Shipping on all orders
DESCRIPTION
The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.
Features
Dual Moving Coil Design
Nude Special Line Contact Stylus & Boron Cantilever
Pre-Threaded Cartridge Body
Aluminum Body Minimizes Unwanted Vibration
Design
Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
SPECIFICATIONS
Frequency Response: 20-50,000 Hz
Channel Separation: 28 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude rectangular shank
Recommended Load Impedance : Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance: 0.5 dB (1 kHz)
Stylus Shape: Special Line Contact
Cantilever: 0.28 mm diameter nude boron
Static Compliance: 22 x 10-6 cm/dyne
Dynamic Compliance: 18 x 10-6 cm/dyne (100 Hz)
Mounting: Half-inch
Cartridge Weight: 7.6 g
Dimensions (W x H x D): 0.68" × 0.66" × 1.01"
Body Material: Aluminum
Model: AT-OC9XSL
Mounting Feature: Half-inch mount
Stylus Curvature Radius: 1.5 x 0.28 mil
Stylus Size: Nude rectangular shank
Terminal Pins: Brass
Type: Dual Moving Coil
Weight: 7.6 g (0.3 oz)
DESCRIPTION
The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.
Features
Dual Moving Coil Design
Nude Special Line Contact Stylus & Boron Cantilever
Pre-Threaded Cartridge Body
Aluminum Body Minimizes Unwanted Vibration
Design
Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
SPECIFICATIONS
Frequency Response: 20-50,000 Hz
Channel Separation: 28 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude rectangular shank
Recommended Load Impedance : Min. 100 ohms (when head amplifier is connected)
