The AT-OC9XEB Dual Moving Coil cartridge with bonded elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.
Free standard shipping on all orders within the continental US.
Dedicated Support from Start to Finish
Concierge-Level Experience tailored to your needs
Assistance with Troubleshooting and Product Insights
Expert help for Product Set-Up
Free Shipping on all orders
DESCRIPTION
The AT-OC9XEB Dual Moving Coil cartridge with bonded elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion.
FEATURES
Dual moving coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
Features a bonded elliptical stylus and aluminum cantilever
A neodymium magnet and pure iron yoke provide increased magnetic energy
Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
TECHNICAL SPECS
Frequency Response: 20-30,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output Voltage: 0.32 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical bonded
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance9 x 10-6 cm/dyne (100 Hz)
Mounting: Half-inch
Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories Included: Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
