BLOWING IN THE WIND
Going a step further than the original Wind Floorstanding, the Wind Design is refined to the highest sonic tolerances. With its hand-selected drivers and exclusive crossover components, the Wind Design offers ultra-broad all-axis sound staging performance. Designed like a musical instrument, the Wind Design delivers sonic expressivity to the absolute, pulling you inside the music.
Dressed for uncompromising musical renditions, the Wind Design’s six-layer multicoated finishes results in additional structural rigidity. The deep luster finish not only adds shine but also allows for a more cohesive acoustic behavior. At the base of the front baffle is a new articulating claw that is adjustable for slanting back the baffle for precise spatial alignment. The rear skid-plate decoupling system allows for additional spatial performance.
FEATURES
- Avant-garde design
- Superior sonic architecture
- Complex cabinet geometry
- Absolute surreal holographic imaging
- Design 6-layer multicoated polyester design finishes
- Exclusive (4x) driver 3-way speaker system
- On- and off-axis point source imaging
- Specially damped, long-throw woofer
- Special low resonance tweeter with chamber
- Multiple midranges
- Extreme-quality hard-wired crossover
TECHNICAL SPECS
- Frequency Response: 24 Hz – 21 kHz ± 3 dB (in room)
- Recommended Power: 80 – 250 W
- Woofer: 8.5″ / 21.59 cm cast frame, specially damped.
- Midrange 2×5.5″ with 3″ / 7.62 cm voice coil. Cast frame. High power handling, wrap around neo magnet structure, accurate linear throw
- Tweeter: 1″ / 2.54 cm alloy dome flexible linear suspension, low resonance, chamber
- Impedance: 4 ohms
- Sensitivity: 87 dB
- Dimensions (w x h x d): 10.7″ x 44.3″ x 14″ / 27.18 x 112.522 x 35.56 cm (over max. size)
- Placement from rear wall: 3′ – 7′ / 91.44 – 213.36 cm
- Placement distance apart: 6′ – 14′ / 182.88 – 426.72 cm
- Break-in Time: 200 – 250 hours
- Crossover Frequency: Woofer to mids, 2nd order / 2nd order, mids to tweets 2nd order 2nd order
- Speaker Terminals: Bi-wireable, Gold WBT connectors
- Weight 74.8lb / 34kg
Dedicated Support from Start to Finish
- Concierge-Level Experience tailored to your needs
- Assistance with Troubleshooting and Product Insights
- Expert help for Product Set-Up
- Fast & Free Shipping on all orders
BLOWING IN THE WIND
Going a step further than the original Wind Floorstanding, the Wind Design is refined to the highest sonic tolerances. With its hand-selected drivers and exclusive crossover components, the Wind Design offers ultra-broad all-axis sound staging performance. Designed like a musical instrument, the Wind Design delivers sonic expressivity to the absolute, pulling you inside the music.
Dressed for uncompromising musical renditions, the Wind Design’s six-layer multicoated finishes results in additional structural rigidity. The deep luster finish not only adds shine but also allows for a more cohesive acoustic behavior. At the base of the front baffle is a new articulating claw that is adjustable for slanting back the baffle for precise spatial alignment. The rear skid-plate decoupling system allows for additional spatial performance.
FEATURES
- Avant-garde design
- Superior sonic architecture
- Complex cabinet geometry
- Absolute surreal holographic imaging
- Design 6-layer multicoated polyester design finishes
- Exclusive (4x) driver 3-way speaker system
- On- and off-axis point source imaging
- Specially damped, long-throw woofer
- Special low resonance tweeter with chamber
- Multiple midranges
- Extreme-quality hard-wired crossover
TECHNICAL SPECS
- Frequency Response: 24 Hz – 21 kHz ± 3 dB (in room)
- Recommended Power: 80 – 250 W
- Woofer: 8.5″ / 21.59 cm cast frame, specially damped.
- Midrange 2×5.5″ with 3″ / 7.62 cm voice coil. Cast frame. High power handling, wrap around neo magnet structure, accurate linear throw
- Tweeter: 1″ / 2.54 cm alloy dome flexible linear suspension, low resonance, chamber
- Impedance: 4 ohms
- Sensitivity: 87 dB
- Dimensions (w x h x d): 10.7″ x 44.3″ x 14″ / 27.18 x 112.522 x 35.56 cm (over max. size)
- Placement from rear wall: 3′ – 7′ / 91.44 – 213.36 cm
- Placement distance apart: 6′ – 14′ / 182.88 – 426.72 cm
- Break-in Time: 200 – 250 hours
- Crossover Frequency: Woofer to mids, 2nd order / 2nd order, mids to tweets 2nd order 2nd order
- Speaker Terminals: Bi-wireable, Gold WBT connectors
- Weight 74.8lb / 34kg