The Theory sb25aw is an all-weather, 4-ohm or 70V/100V, version of the remarkable sb25 indoor surface mount loudspeaker.
Like the sb25, the sb25aw is a wide-bandwidth, high-output multi-use loudspeaker, perfect for restaurants, bars, hotels, retail stores, houses of worship and anywhere high-resolution, high-fidelity background or foreground sound is needed. The sb25aw incorporates a durable perforated aluminum grille, a water-tight loudspeaker wire entry point, selectable hi-z or low-z operating modes, and ships with z-clip and yoke mounting brackets.
Capable of astonishing range and output, the 3.8” deep sb25aw is literally a jack of all trades and will have you re-thinking how you incorporate sound in your next high-value project.
With the available optional Universal Mount Adapter, the sb25aw can go anywhere and look sleek and unobtrusive doing it.
Its slender enclosure, clean aluminum grille, premium finish, and gentle sculpted curves allow it to "disappear" into the architectural background but look surprisingly handsome in environments where it's easily seen - stealth and pretty at the same time.
FEATURES:
-
Extruded and Machined Aluminum Construction with Perforated Aluminum Grille Designed for Indoor and Outdoor Use
-
2 x 5" Theory Carbon Fiber LF Drivers
-
1 x 1.4" Theory AdvancedPolyTM High-Frequency Compression Driver on 125° Axisymmetric Waveguide
-
Multiple Mounts: Z-Clip Surface (incl.) and Yoke Mount Bracket (incl.), Pole, Vesa 75/100mm Mount Holes, Ceiling and wall Pan-and-Tilt Third-Party Mounts
-
Maximum 117dB/1m from Enclosure Only 3.8" Deep
-
Ultra-Wide 125° Conical Coverage (160°@10kHz, -12dB)
-
4-ohm or 70V/100V Operation
APPLICATIONS:
Background and Foreground Business Music Systems: Bars and sports bars, restaurants, hotel pool decks, outdoor shopping centers, courtyards, amusement parks, etc.
Open Air Surround Sound Systems: Outdoor entertainment-focused residential and commercial spaces, backyards, drive-ins, and sports entertainment complexes.
Premium Outdoor and Marine: High-end courtyards, gardens, patios, and yachts - where premium sound is desired and architectural speakers are not an option.
SPECS:
| Description: | High-Output Weather Resistant Surface Mount Loudspeaker |
| Operation: | Passive, Requires 1 Theory Loudspeaker Controller Amp Channel |
| 4-ohm or 70V/100V Operation, Selectable | |
| DSP Requirements: | Requires Model-Specific Theory-Certified DSP Loudspeaker Processing |
| Drivers: | 2 x 5" Theory Carbon Fiber Low-Frequency Drivers |
| 1 x 1.4" Theory Advanced Polymer High-Frequency Compression Driver | |
| Enclosure: | Powder Coated and Anodized Extruded and Machined Aluminum, Perforated Aluminum Grille |
| Terminals: | Euroblock Connector with Parallel Output |
| Outdoor Capability: | Indoor and Outdoor Use |
| Mounting Points: | Two Theory VersaSlotTM T-Slots Running Full Height with 4 x M5 Captive Nuts |
| Included Z-Clips | |
| Optional Yoke Bracket, Universal Mount Adapter, and Table Top Stand | |
| Bandwidth: | 54Hz -23kHz, -6dB; |
| 46Hz-24kHz, -10dB | |
| Coverage: | 125 Degrees Conical |
| 160 Degrees Conical (-12dB @ 10kHz) | |
| Sensitivity: | 94dB (LF); 108dB (HF) SPL/2.83V/1m |
| Power Handling: | 200W (AES); |
| 400W (Continuous); | |
| 800W (Peak) | |
| Minimum Recommended Power: | 50W rms |
| Maximum Output: | 117dB / 1m (based on AES power rating) |
| 123dB SPL / 1m (peak) | |
| Nominal Impedance: | 4-ohms; Hi-Z (70V/100V) Selectable |
| Transformer Taps: | 60W, 30W, 15W, (7.5W, 70V) |
| Colors: | Black, White |
| Dimensions: | 21.5" H x 9.5" W x 3.8" D (546mm H x 241mm W x 97mm D) |
| Total Installed Depth (Z-clip Mount): | 3.93" D (100mm) Including Z-Clip Mounting Brackets |
| Net Weight: | 24.5 lbs. (11.1 kg) |
| Included Accessories: | Theory Z-Clip Mounting Brackets (male and female) for Flat Surface Mounting |
| sb25aw Waterproof Terminal Cover | |
| Optional Accessories: | |
| sb25aw Yoke Bracket | |
| sb Table Top Stand | |
| sb25 Universal Mount Adapter: | |
| Mount Hole Patterns: 75mm and 100mm VESA Square, 2.0” x 4.25” 1/4”-20 and 2.75” x 5.0” 1/4”-20 Threads, Mount Hole for 1/2" Rigid Conduit Hub (1/2" conduit mount) |