The DLC-1500.4d delivers a massive 3,000W in a 16-pound chassis. Capable of delivering 1,500W into 4 or 8-ohms from any channel pair, or 800W into 2 or 4-ohms all channels are driven, this 16lb., 2U loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-1500.4d can drive 70V/100V hi-Z loudspeakers directly - no internal transformer is required.
The DLC-1500.4d is equipped with Dante / AES67 audio-over-IP digital I/O making setting up and deploying even complex dis- tributed audio systems painless and bullet-proof. No bulky analog audio cables are required.
The DLC-1500.4d can drive up to 16 Theory 16-ohm loudspeakers in Lo-Z mode, or more than 300 (!) in Hi-Z mode. You read that right, 300+ Theory speakers at 7.5W each.
Theory DLC loudspeaker controllers can be configured via the on-board web interface accessible via wired Ethernet, or via the on-board WiFi access point and include parametric EQ, delay, gain, and limiter DSP objects to make system optimization easy.
Rack ears are included. Full API and control modules for AMX, Control4. Crestron, Crestron Home, ELAN, Q-SYS, and RTI are available.
FEATURES:
-
2U 4-Channel Amplified Loudspeaker Controller with Dante & AES67
-
2x 1,500W (BTL) @ 100V, 2x 1,200W (BTL) @ 70V
-
4x 400W (SE) and 2x 1,500W (BTL) @ 8-ohms
-
4x 800W (SE) and 2x 1,500W (BTL) @ 4-ohms
-
4x 800W (SE) @ 2-ohms
-
Drives up to 16 Theory 16-ohm Speakers at Low-Z or up to 400 in 70V/100V Operation
APPLICATIONS:
Background and Foreground Business Audio Systems: Bars and sports bars, restaurants, retail stores, hotels, houses of worship, corporate conferences, screening rooms, lobbies, casinos, etc.
Distributed Audio: Residential and commercial distributed audio systems, air-ports, higher-ed campuses, and education facilities.
High Output Surround Sound Systems: Residential and commercial media rooms, gaming systems, executive boardrooms, etc.
Music and Video Post Production: Surround and Dolby Atmos mix rooms where maximum out-put in compact depth is required, music post-production.
Two-channel Music Systems: Premium residential and corporate stereo music systems, music, and performance higher education.
SPECS:
| Description: | 4-Channel Amplified Distribution Loudspeaker Controller with Dante & AES67 |
| 2U Chassis | |
| IP Control via Ethernet or Built-In WiFi Access Point | |
| LoZ BTL Mode | |
| Operation: | LoZ and HiZ (70V/100V) Operation |
| Inputs: | 4 x Balanced Analog Audio |
| 4 x RCA Unbalanced Analog Audio | |
| 1 x S/PDIF Digital Audio | |
| 4 x Dante / AES67 Digital Audio | |
| Outputs: | 4 x Speaker Outputs |
| S/PDIF Digital Audio | |
| 4 x Dante / AES67 Digital Audio | |
| Trigger: | +12VDC |
| Audio Operation: | 48kHz/24-bit |
| On-Board DSP: | 48kHz/32-bit |
| DSP Features: | Loudspeaker Processing For All Theory Models |
| Input Matrix Mixer | |
| 5 Parametric Input EQ Filters | |
| Input Trim | |
| Stereo/Mono Inputs and Zones | |
| Signal Routing Including Priority Automatic Routing | |
| Audio Ducking | |
| 10 Parametric Output EQ Filters | |
| Crossovers | |
| Gain | |
| Delay | |
| Polarity | |
| Peak and RMS Limiters | |
| Frequency Response: | 20Hz-20kHz, +/-0.25dB |
| Power Output: | 2x 1500W (BTL) @ 100V |
| 2x 1200W (BTL) @ 70V | |
| 4x 400W (SE) and 2x 1500W (BTL) @ 8-ohms | |
| 4x 800W (SE) and 2x 1500W (BTL) @ 4-ohms | |
| 4x 800W (SE) @ 2-ohms | |
| Voltage Gain: | Variable |
| Input Sensitivity (selectable): | +14dBu |
| +4dBu | |
| -10dBV (Unbalanced RCA) | |
| Microphone | |
| Power Requirements: | Standby: <1W |
| (1/8 power, all ch. driven): 470W | |
| Idle Noise(A-Wt): | -78dBV |
| Signal to Noise Ratio: | >106dB |
| Distortion (1kHz, 1dB below max output): | <0.02% |
| AC Operation: | 100V-240VAC, 50-60Hz |
| Terminals: | Euroblock Connector with Parallel Output |
| Outdoor Capability: | Indoor Use Only |
| Mounting Points: | Rack Mount Ears Included |
| Finish: | Matte Black |
| Dimensions: | 3.50" H x 19" W x 12.6" D (89mm H x 483mm W x 320mm D) |
| Weight: | 16.8 lbs. (7.62 kg) |
| Included Accessories: | Rack Ears |