The Little Fwend High Automatic Tonearm Lifter is a precision-engineered accessory designed for turntables with thicker platters and higher tonearm mounting points. Ideal for brands such as McIntosh, the High model helps protect your cartridge and stylus from unnecessary wear once playback ends. Designed, hand-assembled, and individually tuned, Little Fwend mounts discreetly beside your tonearm using a magnetic adhesive disc. When the stylus reaches the run-out groove, the lifter automatically raises the tonearm clear of the record—silently and without affecting sound quality. For compatibility, your turntable must have a flat, unobstructed mounting surface between the platter edge and tonearm base, with approximately 28mm of free space beneath the tonearm when positioned in the run-out groove. The High model supports turntables with 48.5mm to 81mm from mounting surface to the underside of the tonearm. Little Fwend delivers effortless protection for high-end cartridges—perfect for manual turntables where performance and longevity matter most.
Little Fwend High 49mm-82mm Automatic Tonearm Lifter (Silver)
- $279.00
- FREE SHIPPING
CONTACT YOUR NEAREST SHOWROOM
FOR CONCIERGE EXPERIENCE
Timonium - 410.308.1650
Columbia - 410.381.2100
Gaithersburg - 301.296.6202
Dedicated Support from Start to Finish
- Concierge-Level Experience tailored to your needs
- Assistance with Troubleshooting and Product Insights
- Expert help for Product Set-Up
- Free Shipping on all orders
The Little Fwend High Automatic Tonearm Lifter is a precision-engineered accessory designed for turntables with thicker platters and higher tonearm mounting points. Ideal for brands such as McIntosh, the High model helps protect your cartridge and stylus from unnecessary wear once playback ends. Designed, hand-assembled, and individually tuned, Little Fwend mounts discreetly beside your tonearm using a magnetic adhesive disc. When the stylus reaches the run-out groove, the lifter automatically raises the tonearm clear of the record—silently and without affecting sound quality. For compatibility, your turntable must have a flat, unobstructed mounting surface between the platter edge and tonearm base, with approximately 28mm of free space beneath the tonearm when positioned in the run-out groove. The High model supports turntables with 48.5mm to 81mm from mounting surface to the underside of the tonearm. Little Fwend delivers effortless protection for high-end cartridges—perfect for manual turntables where performance and longevity matter most.
- For turntables with 48-81mm from the mounting surface and up to the underside of the tonearm, measured while the stylus is in the groove.
- Little Fwend's High model fits turntables with thicker platters such as McIntosh.
- For the Little Fwend to work, you need a flat mounting surface between the edge of the platter and the base of the tonearm to adhere to the magnetic mounting disc. Point the stylus towards the middle of the run-out groove of a 12” record and measure if you have at least 28mm diameter free space straight under the tonearm tube.
- Model: High
- Base material: Nickel plated brass
- Top material: Nickel plated brass, stainless steel
- Rubber material: Neoprene 70 Shore
- Magnet: Neodymium N35
- Set screw: Steel Hex M2 x 3mm
- Damping gel: Fluorocarbon
- Height range: 48-81mmWeight:67g
- Base diameter: 19mm
- Toolkit: Eklind 0.9mm Allen key, magnetic mounting discs and a 3M non-adhesive mounting pad
PRODUCT INFORMATION:
Model: | Barcode:
WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov