The Fathom® SA-600W Subwoofer Amplifier/Processor, with rack mount option and JLink™ Connectivity, is designed to drive custom subwoofer systems in home theater and audio setups. It includes a comprehensive set of Fathom® signal processing features and additional DSP capabilities, all managed through an intuitive onboard interface. Equipped with a switching power supply and proprietary Class-D amplifier design, the SA-600W delivers up to 600 watts of continuous power efficiently.
JL Audio Fathom SA-600W Subwoofer Amplifier/Processor
- $1,500.00
- FREE SHIPPING
CONTACT YOUR NEAREST SHOWROOM
FOR CONCIERGE EXPERIENCE
Timonium - 410.308.1650
Columbia - 410.381.2100
Gaithersburg - 301.296.6202
Dedicated Support from Start to Finish
- Concierge-Level Experience tailored to your needs
- Assistance with Troubleshooting and Product Insights
- Expert help for Product Set-Up
- Free Shipping on all orders
The Fathom® SA-600W Subwoofer Amplifier/Processor, with rack mount option and JLink™ Connectivity, is designed to drive custom subwoofer systems in home theater and audio setups. It includes a comprehensive set of Fathom® signal processing features and additional DSP capabilities, all managed through an intuitive onboard interface. Equipped with a switching power supply and proprietary Class-D amplifier design, the SA-600W delivers up to 600 watts of continuous power efficiently.
- Amplifier Power:
- 600 W x 1 at 3 ohms
- 450 W x 1 at 4 ohms
- 300 W x 1 at 6 ohms
- 225 W x 1 at 8 ohms
- Pristine, stereo audio circuit pathways used throughout
- Intuitive interface with LCD display provides detailed control of on-board settings and functions
- On-board, 2-way active crossover (12/24 dB per octave), capable of supporting a stereo system with a low-pass filtered subwoofer output and high-pass filtered line outputs to feed the main speakers’ amplifier
- Built-in, optimized equalizer curves for use with JL Audio subwoofers systems
- Fixed or variable level control options
- Selectable polarity control (0 or 180 degrees) to optimize subwoofer integration
- Programmable delay controls for the SA-600W’s subwoofer outputs and line outputs.
E.L.F. (Extreme Low Frequency) trim applies equalizer cut or boost at 25 Hz (-12 to + 3 dB) to tailor a subwoofer’s response for a particular room. - D.A.R.O. (Digital Automatic Room Optimization) automatically measures and corrects in-room response to optimize low frequency performance (requires optional JL Audio calibration microphone – CAL-MIC1 – sold separately)
- Three band parametric equalizer with configurable center frequency, Q and gain, to further optimize subwoofer system response
Grounded or Isolated input mode options for quiet, noise-free performance - Stereo, high-level inputs accept direct connection from amplified receiver outputs when no line level signal is available
- Wireless signal connectivity is available via the optional JLink™ Transmitter/Receiver system (JLink™ TRX – sold separately)
- Automatic turn-on options via signal sensing or 12V trigger. 12V input and output triggers to control additional SA-600Ws or peripheral equipment
- Front-mounted USB port and DFU button provides easy access to update firmware
- Versatile mounting options for table-top setups or rack-mount installations
- Power Mode(s): Off, On or Automatic (Signal-Sensing or 12V Trigger)
- 12V Trigger Output Capacity: 150 mA (1/8-inch/3.5mm mini jack)
- Light Modes: N/A
- Unbalanced Inputs: Stereo or Mono (two RCA jacks - Input Impedance of 50k Ohms)
Speaker/High-Level Inputs: Stereo or Mono (removable plug - Input Impedance of 4.4k Ohms) - Input Grounding: Isolated or Grounded
- Level Control: Reference (fixed gain) or Variable from -50dB to +15dB over reference gain (0.5 dB increments)
- Filter Mode(s): Low-Pass, with tracking High-Pass Outputs
- Filter Slope(s): 12/24 dB/octave
- Filter Frequency Range: 30 Hz - 130.1 Hz
- Filter Defeat Function: Yes
- Polarity: 0 or 180 degrees
- Delay (Phase): Variable from 0 – 25 ms (0.1 ms increments, Sub and HP outputs)
- Extreme Low Frequency (E.L.F.) Trim: Variable, -12 dB to +3 dB at 25 Hz (0.5 dB increments)
- Line Outputs: Stereo or Mono (two RCA jacks - Pass-Through or High-Pass)
- Subwoofer Outputs: Neutrik speakOn® 2-Pole Connectors (uses Neutrik part: NL2FX)
- Calibration Mode: Digital Automatic Room Optimization (D.A.R.O.), requires microphone (sold separately)
- Equalizer Bands: 3
- Equalizer Frequency Range: 20 to 160 Hz (1 Hz increments)
- Equalizer Gain Range: -12 dB to +12 dB (0.2 dB increments)
- Equalizer Q Range: 0.7 to 5.0 (0.1 increments)
- Width (W): 16.84 in / 428 mm
- Height (H): 1.75 in / 44 mm
- Depth (D): 13.63 in / 346 mm
- Net Weight: 13.5 lb / 6.12 kg
PRODUCT INFORMATION:
Model: SA-600W | Barcode: 010-03308-00
WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov