The AMP-F2 is equipped with Starke Sound's NS600 amplifier module, each channel can output a con- stant 250W RMS (42) @ 1% THD+N. When bridged, it can support up to 450W RMS (29) with THD+N still below 1%. This ability to handle extremely low-impedance loads ensures ample energy even in large and challenging speaker setups, particularly during high-dynamic low-frequency outputs.
SPECS:
Crafted Like a Piece of Art
The DMP-A10 chassis blends modern aesthetics with romanticism, precision-engineered with CNC technology. At 430mm, it fits seamlessly into high-end audio systems, combining functionality and elegance.
Precision Meets Purity
With a high-speed electrical isolation system , the DMP-A10 separates noise and interference from different circuit boards. The complete physical isolation eliminates any possible interference to audio circuits in the transmission of system circuit signals, ensuring that the audio signal remains pure and undisturbed. The display panel features a shielding design as well, resulting in outstanding audio clarity and precision for an unrivaled listening experience.
Isolated USB Audio, Ultimate Accuracy
By incorporating an advanced electrical isolation circuit, the DMP-A10 minimizes interference from high-noise power sources and grounding loop issues when connecting external DACs and USB devices. Utilizing iCoupler ® technology, it transmits both the clock signal and data to the isolated side in the correct time order and then resynchronizes them to maintain consistency. This ensures that USB signals are transmitted with high fidelity, reducing jitter and maintaining signal accuracy.
Double Subwoofer Output
Featured two subwoofer output ports, the DMP-A10 allows you to connect single or dual subwoofers as needed, or even disable the subwoofer function. MIXER and STEREO modes can be switched with ease, independent adjustments of subwoofer gain, crossover frequency, and delay are available as well. (*Subwoofer function is only available for PCM signals below 192KHz.)
OCXO Clock System
The Eversolo custom-developed temperature control technology for OCXO clock system ensures both audio crystal oscillators(45.1584MHz and 49.152MHz) operate at a constant optimal temperature point, thus eliminating frequency fluctuations caused by temperature changes, delivering extremely low phase noise. Each oscillator undergoes a strict testing process. Therefore, with jitter levels below 50fs, more accurate clock signals are provided to the audio system, adding more clarity, detail and air in sound.
Digital to Digital Converter
The DMP-A10 supports DDC(Digital to Digital Converter) functionality. Digital signals from USB audio input, coaxial/optical input, and ARC input can be output as SPDIF signals or analog signals after various EQ adjustments. Additionally, analog signal input can be captured by the high-spec ADC (up to 192kHz) , then output as SPDIF signals or analog signals after EQ adjustments.
SPECS:
- Material: Aluminum alloy
- Display: 6.5’’ LCD touchscreen
- DAC: ES9039Pro
- Audio Processor: XMOS XU316
- Storage: 4G DDR4+64G eMMC
- SSD Protocol: M.2 2280 NVMe interface*2; Each slot supports up to 4TB SSD
- USB Ports: USB 3.0*2
- Ethernet: RJ-45(10/100/1000Mbps)
- SFP Fiber Network: SFP modules need to be purchased separately; Supports single-mode single-fiber; single-mode dual-fiber optical modules, as well as SFP electrical port modules
- Wi-Fi: 2.4G+5G
- DAC Decoding: Supports up to stereo DSD512 Native and PCM 768KHz 32-Bit
- Music File Formats: DSD(DSF, DFF, SACD ISO Support DST up to DSD512), MP3, APE, WAV, FLAC, AIF, AIFF, AAC, NRG, CUE
- Music Services: TIDAL, Qobuz, HIGHRESAUDIO, Amazon Music, Deezer etc.
- Music Streaming: TIDAL Connect, WebDav, UPnP, DLNA etc.
- Bluetooth Input BT 5.0,: BT 5.0. Supports SBC/AAC
- USB-B Audio Input: USB Compatibility: Windows(10, 11), Mac, Android, IOS
- Analog Audio Input: XLR(balanced)+ RCA(pre-input); Input range: RCA maximum 2.5 Vrms, XLR maximum 5 Vrms
- Optical/Coax Input: Supports up to stereo PCM 192KHz 24Bit, DSD64 Dop
- ARC Input: Supports up to stereo PCM 192KHz 24Bit
- Optical/Coax Output: Supports up to stereo PCM 192KHz 24Bit, DSD64 Dop
- USB Audio Output: Supports up to stereo DSD512 Native, PCM 768KHz 32Bit (Only supports DAC audio devices compliant with UAC standards.)
- Analog Audio Output: XLR(balanced)+RCA(pre-output)
- Control Methods: On-screen touch control, Android/iPhone/iPad APP control, remote control
- Analog Audio Characteristics:
Output Level: XLR 4.2 V; RCA 2.1V
Frequency Response: 20Hz~20KHz XLR/RCA(土0. 15dB THD+N: XLR:<0.000078%(-122dB/RCA :<0.00009%(-121dB
Dynamic Range: XLR > 130dB/RCA > 129dB
SNR: XLR >130dB/RCA >129dB
Crosstalk: XLR>-123dB/RCA>-122dB - Power Supply: AC 110~240V 50/60Hz
- Rated Power: 30W
- Accessories: Remote control, power cable, product manual, trigger cable, antenna
PRODUCT INFORMATION:
Model: AMP-F2+DMP-A10 | Barcode:
WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov