Theory Audio Design DLC-250.8 8-Channel Amplified Loudspeaker Controller
$4,175.00
FREE SHIPPING
Free standard shipping on all orders within the continental US.
This item is only available in our showrooms. Call for details.
Timonium - 410.308.1650
Columbia - 410.381.2100
Gaithersburg - 301.296.6202
$ {{amount}}
Dedicated Support from Start to Finish
Concierge-Level Experience tailored to your needs
Assistance with Troubleshooting and Product Insights
Expert help for Product Set-Up
Free Shipping on all orders
DESCRIPTION
The DLC-250.8 is an 8-channel amplifier capable of delivering 250W into 4, 8, and 16-ohms from any channel pair, or 125W into 4, 8 or 16-ohms all channels driven; this 1U loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-250.8 can drive 70V/100V hi-Z loudspeakers direct - no internal transformer is required.
Features
1U 8-channel Amplified Loudspeaker Controller
250W per Channel @ 4, 8, 16-ohms and 70V/100V
125W per Channel @ 4, 8, 16-ohms All Channels Driven
125W per Channel @ 70V/100V All Channels Driven
Power Sharing Between Neighboring Channels
Performance & Control
The DLC-250.8 can drive up to 32 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 128 in Hi-Z mode - all from a 1U chassis! The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board WiFi access point and includes parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.
SPECIFICATIONS
Operation: LoZ and HiZ (70V/100V) Operation
Inputs
8 x Balanced Analog Audio
8 x RCA Unbalanced Analog Audio
1 x S/PDIF Digital Audio (stereo)
Outputs
8 x Speaker Outputs
S/PDIF Digital Audio (stereo)
Trigger: +12VDC
Audio Operation: 48kHz/24-bit
On-Board DSP: 48kHz/32-bit
DSP Features
Loudspeaker Processing
Input Matrix Mixer
5 Parametric Input EQ Filters
Input Trim
Stereo/Mono Inputs and Zones
Signal Routing Including Priority Automatic Routing
Audio Ducking
10 Parametric Output EQ Filters
Crossovers
Gain
Delay
Polarity
Peak and RMS Limiters
Frequency Response: 20Hz-20kHz, +/-0.25dB
Power Output
250W per channel @ 4, 8, 16-ohms and 70V/100V
125W per channel @ 4, 8, 16-ohms all channels driven
125W per channel @ 70V/100V all channels driven
Voltage Gain: Variable
Input Sensitivity (selectable)
+14dBu
+4dBu
-10dBV (Unbalanced RCA)
Power Requirements
Standby: <1W
(1/8 power, all ch. driven): 70W
Idle Noise(A-Wt): -78dBV
Signal to Noise Ratio: >106dB
Distortion (1kHz, 1dB below max output): <0.02%
AC Operation: 100V-240VAC, 50-60Hz
Terminals: Eurblock Connectors
Outdoor Capability: Indoor Use Only
Mounting Points: Rack Mount (with included accessories)
Dimensions: 19.0" x 1.75" x 12.6"
Net Weight: 7.7 lbs.
DESCRIPTION
The DLC-250.8 is an 8-channel amplifier capable of delivering 250W into 4, 8, and 16-ohms from any channel pair, or 125W into 4, 8 or 16-ohms all channels driven; this 1U loudspeaker controller packs new levels of power into minimal rack space. If that weren’t enough, the DLC-250.8 can drive 70V/100V hi-Z loudspeakers direct - no internal transformer is required.
Features
1U 8-channel Amplified Loudspeaker Controller
250W per Channel @ 4, 8, 16-ohms and 70V/100V
125W per Channel @ 4, 8, 16-ohms All Channels Driven
125W per Channel @ 70V/100V All Channels Driven
Power Sharing Between Neighboring Channels
Performance & Control
The DLC-250.8 can drive up to 32 Theory 16-ohm loudspeakers in Lo-Z mode, or up to 128 in Hi-Z mode - all from a 1U chassis! The DLC loudspeaker controllers from Theory can be configured via its on-board web interface accessible via wired Ethernet, or via its on-board WiFi access point and includes parametric EQ, delay, gain and limiter DSP objects to make system optimization easy.
SPECIFICATIONS
Operation: LoZ and HiZ (70V/100V) Operation
Inputs
8 x Balanced Analog Audio
8 x RCA Unbalanced Analog Audio
1 x S/PDIF Digital Audio (stereo)
Outputs
8 x Speaker Outputs
S/PDIF Digital Audio (stereo)
Trigger: +12VDC
Audio Operation: 48kHz/24-bit
On-Board DSP: 48kHz/32-bit
DSP Features
Loudspeaker Processing
Input Matrix Mixer
5 Parametric Input EQ Filters
Input Trim
Stereo/Mono Inputs and Zones
Signal Routing Including Priority Automatic Routing
Audio Ducking
10 Parametric Output EQ Filters
Crossovers
Gain
Delay
Polarity
Peak and RMS Limiters
Frequency Response: 20Hz-20kHz, +/-0.25dB
Power Output
250W per channel @ 4, 8, 16-ohms and 70V/100V
125W per channel @ 4, 8, 16-ohms all channels driven
125W per channel @ 70V/100V all channels driven
Voltage Gain: Variable
Input Sensitivity (selectable)
+14dBu
+4dBu
-10dBV (Unbalanced RCA)
Power Requirements
Standby: <1W
(1/8 power, all ch. driven): 70W
Idle Noise(A-Wt): -78dBV
Signal to Noise Ratio: >106dB
Distortion (1kHz, 1dB below max output): <0.02%
AC Operation: 100V-240VAC, 50-60Hz
Terminals: Eurblock Connectors
Outdoor Capability: Indoor Use Only
Mounting Points: Rack Mount (with included accessories)
