McIntosh MAC6700 2-Channel Stereo Receiver

  • Sale
  • $ 6,500
  • FREE SHIPPING

Free standard shipping on all orders within the continental US.



MAC6700 features 200 watts per channel and is designed to meet the needs of the next generation of music lovers.

The built-in AM/FM tuner receives your favorite radio stations with clarity and realism that is free from noise and distortion. It features the same high performance as a stand alone tuners, along with 20 presets for each radio band, as well as a remote AM antenna.

With its preamp section featuring 11 total inputs—including 3 digital inputs that will decode your digital music at up to 32 bits and 192kHzMAC6700 is sure to provide you with enough connections and modern technology to keep all your music sources connected and sounding great. Two dedicated phono sections (1 moving magnet and 1 moving coil) will bring new life to your record collection and deliver the best possible sound from your turntable. The Home Theater Pass Through feature will allow for seamless integration into your existing multi-channel theater system.

At 200 watts per channel, the amplifier section has enough power to properly drive virtually all loudspeakers. Utilizing the world famous McIntosh Autoformer guarantees your speakers will always receive the full 200 Watts regardless of their impedance, while Power Guard® will prevent clipping and keep your speakers safe from damage. This new High Drive headphone amplifier features increased gain and output power, and is optimized for virtually all headphone types for the ultimate personal listening experience.

FEATURES

  • 2 x 200w
  • Output autoformers for 2, 4 & 8 ohms
  • Bass and treble controls
  • 5 high-level unbalanced & 1 high-level balanced inputs
  • MC & MM phono sections
  • 1⁄4” headphone jack
  • 3 digital inputs: 1 coaxial, 1 optical, and 1 USB
  • 32-bit, 192kHz D/A converter with wide dynamic range and extremely low distortion
  • Built in AM/FM tuner
  • Handcrafted at McIntosh's Binghamton, New York factory

TECHNICAL SPECS

Electronic Specifications:

  • Power Output Per Channel: 200w
  • Number of Channels: 2
  • Speaker Impedance: 2, 4, or 8 ohms
  • Rate Power Band: 20 Hz to 20 kHz
  • Total Harmonic Distortion: 0.005%
  • Dynamic Headroom: 2 dB
  • Frequency Response +0,-0.5 DB: 20 Hz to 20 kHz
  • Frequency Response +0, -3DB: -10 Hz to 100 kHz
  • Sensitivity Phono (Moving Coil): 0.25 mV
  • Sensitivity Phono (Moving Magnet): 2.5 mV
  • Sensitivity High Level
    • Balanced: 0.5 V
    • Unbalanced: 0.25 V
  • Sensitivity (Power Amp): 1.4 V
  • Signal-To-Noise Ratio (Moving Coil): 82 dB
  • Signal-To-Noise Ratio (Moving Magnet): 84 dB
  • Signal-To-Noise Ratio (High Level): 95 dB
  • Signal-To-Noise Ratio (Power Amp): 113 dB
  • Input Impedance: 20 K / 20 K
  • Damping Factor: >40
  • Maximum Output: 8 V unbalanced
Connectivity:

  • Balanced Input: 1
  • Unbalanced Input: 5
  • Phono Input Moving Coil: 1 (adjustable loading)
  • Phono Input Moving Magnet: 1 (fixed loading)
  • Digital Coaxial Input: 1
  • Digital Optical Input: 1
  • Digital MCT (DIN) Input: 0
  • Digital USB Input: 1
  • Balanced Variable Output: 0
  • Unbalanced Fixed Output: 0
  • Unbalanced Variable Output: 2
  • Headphone: 1/4" high drive
  • AM/FM tuner option
  • Home theater passthrough
  • Unbalanced Analog Connector Type: Standard
  • Service Port: 0
Digital Audio Specifications:

  • Digital-To-Analog Converter (DAC) Type: 2-channel, 32-bit / 192 kHz PCM / DSD
  • Digital Coaxial Input Sample Rate: 16-bit, 24-bit / 32 kHz to 96 kHz
  • Digital Optical Input Sample Rate: 16-bit, 24-bit / 32 kHz to 96 kHz
  • Digital MCT (DIN) Input Sample Rate: N/A
  • Digital USB Input Sample Rate: 16-bit, 24-bit, 32-bit / 32 kHz to 192 kHz
Control:

  • Tone Controls: Bass and treble
  • Tone bypass and input assign
  • RS232 control input
  • Power Control Output: 1 main, 2 trigger
  • Rear Panel Data Port: 6
  • Rear panel IR sensor input
  • Input level match
General Specifications:

  • Solid state
  • Output autoformer
  • Output meters
  • Dual layer chassis
  • Chassis Finish: black painted steel
  • Power Requirement: 120V 50/60Hz, 4.8A
  • Standby Power Requirement: <0.25w
Weights & Dimensions:

  • Weight: 76 lbs 
  • Dimensions: 17-1/2"w x 7-5/8"h x 22"d

MANUALS


WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Sale

Unavailable

Sold Out