Up to 12 months 0% No Interest Financing when you choose to pay with Klarna at checkout

Audioengine W3 Wireless Audio Adapter Kit (Each)

  • Sale
  • $ 149

Free standard shipping on all orders within the continental US.

Audioengine W3 Premium Wireless Audio Adapter - Play all your music wirelessly from any audio device or computer to your Audioengine powered speakers, stereo receiver, or powered subwoofer. W3 provides CD-quality HD stereo sound with no reduction in audio quality.

Functional Overview

The Audioengine W3 is designed to connect your audio components wirelessly. W3 handles USB audio up to 16 bits / 48KHz with no compression, as well as analog audio via a 3.5 mm minijack. Think of W3 as a wireless 16-bit USB DAC as well as a wireless audio link.

W3 consists of 2 parts, the "Sender" and "Receiver." The Sender transmits audio from your computer through USB audio or from any product with 3.5mm mini-jack or RCA audio outputs. The other side of W3, the Receiver, connects audio to any product with mini-jack or RCA audio connectors.

Power for the Sender and Receiver is provided from either a USB computer port, from the included USB AC power adapter, or from any other USB AC charger (such as an iPod charger, for example). Another USB power source is the Audioengine A5+ powered speakers, which are equipped with a USB charger on rear of the left speaker. The 100 ft (30 m) typical range, low latency, built-in DAC, and resistance to interference and dropouts make the W3 the best-sounding 16-bit wireless system available.

W3 Sample Network Configurations


  • Easy setup, connects in seconds
  • Works w/ Mac or PC (or without a computer)
  • Plug-n-play, no software to download or install
  • Super-compact size, no batteries required
  • 100 ft (30 m) range w/ no dropouts or interference
  • CD-quality stereo sound w/ no reduction in audio quality
  • Plays all music formats from any media player
  • Replaces any RCA or mini-jack (3.5 mm) cable
  • What's in the Box:
    • Wireless audio sender
    • Wireless audio receiver
    • USB AC power adapter
    • RCA adapter "Y" cable (12")
    • Mini-jack (3.5 mm) audio cables (20") (2)
    • Setup Guide


    • Desktop computers, laptops, notebooks
    • Flat panel TVs w/ an analog output
    • iPods and all other music players
    • Internet radio and network music systems
    • DVD / CD players
    • Videogame consoles
    • Digital radio and satellite receivers
    • Subwoofers and surround sound receivers
    • All other products w/ 1/8" jack or RCA connectors


      • DAC type: Dual mode USB and analog (via CS5343 ADC) wireless DAC
      • Inputs: USB audio, mini-jack analog
      • Outputs: Analog mini-jack
      • Full scale output: 1.0Vrms
      • Output impedance: 470 ohms
      • Power source: Sender: USB from computer or adapter, Receiver: USB power adapter
      • Power requirements: Sender: 180mA, 5V, Receiver: 150mA, 5V
      • Crosstalk: -65dB
      • Frequency response: 20Hz to 20KHz, +/- .2dB
      • USB device class: Type 1.1 or above
      • Wireless range: >100 ft
      • Latency: <20ms
      • Receivers supported: Up to 3


        WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



        Sold Out