The AT-MONO3/LP is a high-output (1.2 mV) moving coil cartridge designed specifically for use with mono vinyl records.* Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT-MONO3/LP cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The voice coils are wired in series, resulting in one mono signal that is transmitted to the cartridge’s white-blue terminals and red-green terminals in order to feed both inputs of a stereo phono preamp.
* This cartridge with 0.6 mil conical stylus is not compatible with SP (standard play) shellac records. It is designed to play mono microgroove 33-1/3 vinyl records.
FEATURES
- Dual moving coil cartridge designed specifically for use with mono vinyl records* (mono microgroove 33-1/3 vinyl records)
- Aluminum cantilever with 0.6 mil conical stylus
- Strong, rigid body construction of die-cast aluminum alloy and synthetic resin
- PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- Compatible with stereo playback systems
TECHNICAL SPECS
- Frequency Response: 20-20,000 Hz
- Vertical Tracking Angle: 23°
- Vertical Tracking Force: 1.5-2.5 g (2.0 g standard)
- Stylus Construction: 0.6 mil
- Recommended Load Impedance: 400-47,000 ohms*
- Coil Impedance: 40 ohms (1 kHz)
- DC Resistance: 40 ohms
- Coil Inductance: 190 µH (1 kHz)
- Output Voltage: 1.2 mV (at 1 kHz, 5 cm/sec)
- Stylus Shape: 0.6 mil conical
- Cantilever: Aluminum pipe
- Static Compliance: 20 x 10-6 cm/dyne
- Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov