Anthem D2V 3D AV processor

  • Sale
  • $ 9,499


The D2V 3D pushes the boundaries on what you expect from music and home theater performance. With the unparalleled flexibility you have to come to expect from Anthem processors, it provides both the versatility and adjustability you need to all of your digital video components.  The results are spectacular.

From riding the third dimension on light cycles in the movie Tron, to racing through the 3D jungles of Pandora in Avatar, the movie experience is always better in triple dimensions. 3D video has a different structure than traditional video so it must pass through the A / V processor without being affected. The new Anthem D2V circuit board automatically detects the presence of 3D video and goes into passthrough mode as per a source menu option for video output configuration, passing the 3D HDMI signal from a 3D Blu-ray player to a 3D TV at resolutions up to 1080p. For additional convenience, in passthrough mode the output refresh rate is now automatically matched to the source’s frame refresh rate which is useful for sources that output a mix between 24, 50 and 60Hz.

  • 7.1-channel audio and video processor
  • 8 HDMI inputs and 2 parallel HDMI outputs
  • Top four ports support true bypass sensing 3D inputs automatically
  • Dolby® TrueHD
  • DTS-HD Master Audio
  • PCM 24 / 192 highest quality 1080p upscaling w/ 1080p 24 compatibility
  • Anthem Room Correction
  • Premium quality A / D and D / A converters
  • 24bit / 192kHz upsampling on all channels in main zone, two stereo zones
  • All 8 HDMI inputs are connected through high-performance TMDS timing regenerators and multiplexers
  • Receiver contains a programmable equalizer and a Clock Data Recovery function for each of the three TMDS pairs in an HDMI or DVI signal 
  • TMDS data outputs are regenerated and perfectly aligned to the regenerated TMDS clock signal
  • Low-jitter DVI / HDMI signal that is easily decoded by the HDMI receiver
  • Video Format Conversion—the latest-generation Sigma Designs VXP broadcast-quality digital image processor (supporting deep color and better-than-ever video algorithms) converts any SD or HD video standard to other video standards
  • Quadruple video output configuration—easy to switch from one configuration to another
  • Superior image quality—per-pixel processing and motion-adaptive de-interlacing ensures optimal image sharpness and picture resolution
  • Dynamic directional interpolation—eliminates jaggy artifacts found in traditional de-interlacing algorithms
  • Full film-mode detection for all SD and HD inputs
  • Video transcoding allows S-Video and Component Video inputs to be digitally processed and enhanced and then routed through the Component or HDMI outputs
  • Each source can be adjusted independently for best picture
  • Adjustable cropping
  • Aspect ratio control
  • Chroma bug filter
  • Frame lock
  • Gamma correction
  • Adjustable noise reduction
  • Adjustable detail enhancement
  • Custom output resolution and timing via PC utility
  • All on-screen displays are shown through HDMI and Component Video
  • On-screen display shows adjustments being made (can be disabled)
  • All functions are available for HD input
  • Anthem's Own Design - two dual-core digital signal processing engines offer 800 MIPS to allow decoding of the new HD audio standards—Dolby Digital Plus, Dolby TrueHD, and DTS-HD high-resolution audio and DTS-HD Master Audio
  • Triple 4Mbit 8ns external memory is large  enough to ensure that the DSP engines never run out of resources
  • 4 layer hand-designed motherboard includes separate power and groundplanes
  • Independent 6 and 8 layer DSP, A / D and D / A converter boards
  • Fully buffered audio / video inputs for minimum crosstalk
  • Audio-grade film capacitors and operational amplifiers 
  • Low-ESR electrolytic capacitors
  • Audio-grade signal-coupling capacitors
  • Fourteen independently regulated output stages ensure optimal operating environment
  • Unparalleled analog-to-digital and digital-to-analog conversions - eliminates noise in the 20 to 80kHz frequency band due to high quality ADC and DAC designs
  • Anthem Room Correction—analyzes each speaker's in-room sound and then computes the required correction to create optimal performance from every speaker
  • Bandwidth from input to output jack (bypass mode for component video) Composite and S-Video: 70MHz
  • Component: Y 110MHz
  • Component Pr: 90MHz
  • Component Pb: 80MHz
  • Analog and Video Inputs and Outputs: 75 ohms, 1.5Vp-p
  • Analog Audio Input Impedance: 20 ohms
  • Analog Audio Output Impedance: Main-RCA 300 ohms; XLR 600 ohms; Zones 2/ 3 and record 51 ohms
  • Analog Audio Rated Input: 2 Vrms
  • Analog Audio Maximum Input: 5.3Vrms
  • Analog Audio Minimum Load: 5k ohms
  • Analog Audio Rated Output (100 kohms load): 2.0Vrms
  • Analog Audio Maximum Output: RCA 6.3Vrms; XLR 12.6Vrms
  • Analog Audio Headphone Output: 100mW into 32 ohms at 0.2% THD+N
  • Volume Control Range: main -95.5dB to +31.5dB (in 0.5dB increments); zone 2/ 3 headphone - -62.5dB to +10.0dB (in 1.25dB increments)
  • Analog Audio Crosstalk (at 1kHz): 82dB between channels; 86dB between inputs
  • Analog Audio XLR Pin Configuration: pin1: ground, pin 2: positive, pin 3: negative
  • Digital Audio Crossover: high-pass slope (small speaker setting) 12dB / octave (2nd order); low pass slope (subwoofer) 24dB / octave (4th order); frequency 25Hz to 160Hz 
  • Digital Audio Tone Control: shelf filter type; range + / - 12dB; bass turnover frequency 200Hz; treble turnover frequency 2kHz
  • Digital Audio Analog-to-Digital Conversion S / N Ratio (at digital Rec output) (IEC-A Filter): 100dB
  • Main Path (RCA and XLR Outputs):
    • Frequency Response and Bandwidth Analog Direct Inputs 10Hz to 20kHz, 1Hz to 130kHz; analog-DSP inputs at 24 / 96 10Hz to 20kHz, 2Hz to 44.1kHz; digital inputs at 24 / 96 10Hz to 20kHz, 1Hz to 45kHz
    • THD+N (at Rated input and output) analog direct inputs 0.0006% (80kHz BW); analog-DSP inputs at 24 / 48 or 24 / 96 0.004% (AES17 filter); digital inputs at 24 / 48 or 24 / 96 0.004% (AES17 filter)
    • IMD (CCIF at 15kHz and 16kHz) analog direct inputs <0.001%; analog-dsp inputs at 24 / 48 0.001%; digital inputs at 24 / 48or 24 / 96 0.001%
    • S / N Ratio (ref. 2.0Vrms IEC-A Filter) analog direct inputs 107dB; analog-DSP inputs at 24 / 48 or 24 / 96 101dB; digital inputs at 24 / 48 or 24 / 96 104dB
  • Zone 2 and Zone 3 Paths:
    • Frequency Response and Bandwidth 20Hz to 20kHz (+0 -0.1dB), 3Hz to 140kHz (+0, -3dB)
    • THD+N (at rated input and output) 0.06% (80kHz BW)
    • IMD (CCIF at 15kHz and 16kHz 0.06%
    • S / N Ratio (ref. 2.0Vrms, IEC-A Filter) 97dB
  • FM Tuner:
    • Sensitivity 50dB S / N 13dBu typical, 25dBu max.; IHF 10dBu typical, 20dBu max.
    • S / N Ratio Mono 75dB typical, 65dB min.; Stereo 69dB typical, 60dB min.
    • Distortion Mono 0.2% typical, 1.0% max. Stereo 0.3% typical, 1.5% max. 
    • Stereo Separation 40dB typical, 25dB min.
    • Alternate Channel Selectivity (+ / -400kHz) 70dB typical, 60dB min.
    • Frequency Response 25Hz to 15kHz (+0 -2dB)
  • AM Tuner:
    • Sensitivity (20dB S / N) 49dBu typical, 56 dBu max
    • S / N Ratio 50dB typical, 43dB min.
    • Distortion 0.7% typical, 2.0% max. 
    • One-Signal Selectivity ( + / -10kHz) 24dB typical, 18dB min.
  • Control:
    • Infra Red Carrier Frequency 38kHz; maximum 12V supply current 150mA; maximum emitter current 60mA per output
    • RS-232 Interface connection DB-9F, straight-wired; pinout pin2: Tx, Pin 3: Rx, Pin 5: Ground; Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200; configuration 8 data  bits, 1 stop bit, no parity bits, flow control (RTS / CTS, none)
    • Trigger Outputs polarity tip positive, sleeve ground; maximum current at 12VDC 300mA between all three triggers; sequential delay 250ms
  • Consumption: maximum 170W
  • Dimensions:
    • Height: 5-7/8", including feet; rack-mounting: 3 rack units without feet
    • Width: standard version—19-1/4"; rack mount version—19"; no-handle version—17-1/4"
    • Depth: 15-1/4"
    • Weight: 27 lbs
60-Day Money-Back Guarantee

We want you to love every item you purchase from SKY by Gramophone. If you are not satisfied with your purchase, you may return items that are complete and like-new for any reason within 60 days. You may choose an exchange or a refund for the full amount of the items you purchased*. Refunds must be issued to the same credit card, debit card, gift certificate, or other form of payment used in the original transaction.

SKY by Gramophone is an authorized dealer for all products we carry, which means manufacturer warranties are valid on every product purchased from us.

In the unlikely event a television arrives damaged, we require notification of damages within 24 hours of receipt of the unit.

*Restocking fees apply for furniture and televisions, as well as for products without original packaging, missing accessories, and not in new or like-new condition.

AUTHORIZED DEALER - FULL WARRANTY

FREE U.S. SHIPPING


Sale

Unavailable

Sold Out